 |
-
Static control specialist, TBA Electro Conductive Products (ECP) has introduced a new static dissipative (SD) stoving enamel that provides a high performance, rapid curing, high build coating with excellent static control characteristics.
ECP 538 multi-purpose SD stoving enamel is ideal for use on metal surfaces such as louvred panels, racking and trolleys, producing surface resistivity of less than 109 Ohms/sq and charge decay rate of 5000 to 37V in less than 2 seconds JCI155. The light grey enamel is formulated for use with all types of conventional application equipment including hot spray, airless, electrostatic and "spinning bell" dipping.
A coating of 50µm wet film thickness provides a final dry film thickness of 25µm. Specifications include specific gravity of 1.50g/cm3, viscosity of 3 to 4.5 poise IC Cone and Plate, flashpoint between 22 and 32 Degrees C, flash off time of 15 minutes, temperature resistance of 160 Degrees C and coverage of approximately 15 square metres per litre. Stoving requirements are 30 minutes at 120 Degrees C.
To ensure excellent performance, TBA ECP can also provide suitable degreasing solvents and primers for various surfaces including aluminium, alloys and steel that promote improved appearance and adhesion. Further improvements can be obtained by using TBA ECP's range of full stoving primers that also provide corrosion protection. Several such primers are available including TBA Universal Air Dry, Stoving Primer, Undercoat Z41M111 and Red Oxide Epikote Stoving Primer.
TBA Electro Conductive Products is a specialist manufacturer of high quality electro static protection (ESP) and electro magnetic interference (EMI) shielding products. A wide variety of plastics and coatings is available to enable manufacture of products for EMI shielding and static protection in general electronic production and cleanroom applications.
Reference: P3630
|
|
For more information, please contact: TBA Electro Conductive Products,
PO Box 56, Rochdale, Lancashire, OL12 7EY. Tel: 01706 647718, Fax: 01706
646170. Email: info@tbaecp.co.uk
Press enquiries to: Tim Jennings, Marshall Jennings PR Ltd, Wyvols Court,
Swallowfield, Reading, Berkshire, RG7 1WY. Tel: 0118 988 0288, Fax: 0118
988 0388. Email: tim.jennings@mjpr.com
Web site: http://www.mjpr.com
|
